
Union City, NJ
Drywall Repair in Union City, Done the Way You'd Want a Neighbor to Do It
We repair damaged drywall, patch holes and cracks, hang and finish new board, fix sagging or stained ceilings and blend paint touch-ups so the repair fades into the wall. We work in homes and rental units across Union City and nearby towns like West New York and North Bergen.
- Itemized price on paper
- Rooms masked before work
- Patches blended to existing texture
- Daily vacuum and wipe-down
How a Job Runs, Start to Finish
Small repairs and larger projects follow the same path. Hanging and finishing jobs just spend more days in the middle stages.
- 1
Start with a call
Describe the damage and roughly where it is. We'll ask how big it looks and whether water played a part, then find a time to come see it.
- 2
A visit and a written estimate
On site we look closely at the damage and the surface around it, and explain the repair we'd suggest. The price follows in writing, with each piece of work listed on its own line.
- 3
Building the repair
Floors and furniture get covered first. Damaged material is cut back to sound board or framing and replaced, the seams are taped, and compound goes on in thin layers, each one left to dry fully before the next.
- 4
Blending it in and cleaning up
Once the final layer has cured, we smooth it using sanders connected to a vacuum, rebuild the surrounding texture and seal the area with primer. A paint touch-up carries the color across the repair. Before we pack up, the floor is vacuumed, surfaces are wiped and we look over the finished wall together with you.
The Drywall and Ceiling Services We Offer
Plenty of jobs begin small: a hole where a door handle swung into the wall, a hairline crack that reopens every winter, a brown ring spreading across the ceiling. Drywall repair and drywall patching take care of that kind of damage, while drywall hanging and drywall finishing cover rooms or walls that need fresh board. Wall repair and ceiling repair are for larger areas, older plaster included. Surface preparation and sanding, along with paint touch-ups, take each repair the last step so the wall simply looks like a wall again.

Drywall Repair
Holes, cracks, nail pops and water-stained sections repaired, sanded and primed so the fix disappears into the wall around it.
Drywall Patching
Small and mid-sized holes cut back, backed, taped and feathered so the repair sits flush and stays hidden under paint.
Drywall Hanging
New drywall for gutted rooms, new partitions and ceilings, cut and fastened so the taping and finishing that follow go smoothly.
Drywall Finishing
Taping, mudding and sanding new or repaired drywall so seams, screws and corners disappear once the paint goes on.
Wall Repair
Cracks, dents, holes and stained sections in drywall or older plaster walls, repaired and blended into the surrounding surface so the wall reads as one.
Ceiling Repair
We fix stained, cracked and sagging ceilings, match the existing texture and leave the room clean, so the repair disappears once the light hits it.
Surface Preparation and Sanding
We scrape, fill, prime and sand walls and ceilings so the next coat of paint goes on flat, with dust kept under control.
Paint Touch-Ups
We prime repaired spots, match your color and sheen, and blend new paint into the old so patches, scuffs and nail holes stop drawing the eye.
Paint-Ready Walls
Before a room gets new color, we fix the drywall underneath so dents, seams and old patches don't show through the fresh coat.

A Local Drywall Company That Works Like a Neighbor
We're a small drywall business serving Union City and the towns around it. Our work happens in kitchens, bedrooms, hallways and apartments where people live, so we keep the job quiet, contained and as short as the materials allow.
We focus on drywall and the surfaces it connects to: repairs, patches, new board, finishing, ceilings and the sanding and paint touch-ups that complete a repair. Homeowners call us for a hole that's been bothering them for months, and landlords and property managers call us to get a damaged wall back in shape between tenants. Each gets the same careful process.

How We Work Inside Your Home
We treat every job the way we'd want our own place treated. That shows up in small habits more than big promises.
- We tell you what the wall actually needs
- Not every crack calls for new board. If a patch and proper taping will hold, we say so, and if a section is soft, crumbling or keeps failing, we explain why replacing it is the better choice.
- Protection goes down first
- Before any cutting starts, drop cloths cover the floor and we shift or wrap the furniture nearby. On sanding days, plastic sheeting hangs over open doorways so the dust stays in the room we're working in, not on your kitchen counter.
- Texture matching is part of the job
- A flat patch on a textured wall stands out the moment light hits it. We study the existing surface, whether it's smooth, orange peel, knockdown or old plaster, and build the repair to match it.
- Patience with every coat
- Joint compound needs time to dry between coats, and rushing it causes shrinkage, bubbles and seams that show later. We plan the schedule around proper drying, then sand and check the surface under a work light before calling it done.
- The price is on paper before we start
- Each part of the job is listed separately in a written estimate you see ahead of time. If opening a wall turns up something we didn't expect, we pause, show you what's there and agree on next steps together.
What Moves the Price of a Drywall Job
Two repairs that look the same from across the room can need very different amounts of labor. Cost comes down to how much is damaged, what's hiding behind it and how much finishing work it takes before the repair vanishes. These are the things we weigh when pricing a job.
We give you a written estimate after seeing the damage in person, and it lists each part of the work separately. Any change to the scope is discussed and agreed before we do it.
- How much damage, and where
- One nail pop is a quick stop. A handful of holes spread over several rooms, or a full sheet that has to come out, adds material and extra rounds of compound.
- Wall or ceiling
- Ceiling repair takes more setup, more ladder work and more care with gravity working against every coat. High ceilings and stairwells add time for staging.
- Hidden conditions
- Leftover water damage, plaster that has let go of its lath or framing that needs attention all get fixed before new material goes up. On some walls the full picture only appears once the damaged piece is cut out.
- Texture and how smooth it must be
- A wall that catches bright, raking light from a big window shows every ridge, so it gets extra skim coats and careful sanding. A closet or utility area doesn't need that level. Recreating an unusual hand-applied texture also means test passes and more time.
- Paint touch-up scope
- Blending a small area is quicker than repainting a full wall corner to corner. If the existing paint has faded, we may recommend carrying the touch-up to a natural break.
- Access and furniture
- Rooms that are cleared before we arrive go faster. Tight hallways, built-ins and stairs up to upper floors can add setup and protection time.
Where We Work
We're based in Union City, NJ, and take drywall work throughout Hudson County and nearby. That includes North Bergen, West New York, Weehawken, Hoboken, Jersey City, Secaucus, Kearny, Cliffside Park and Lyndhurst, along with jobs in Manhattan.
- Union City
- North Bergen
- Hoboken
- West New York
- Weehawken
- Manhattan
- Jersey City
- Kearny
- Cliffside Park
- Secaucus
- Lyndhurst
If you're unsure whether your address is in range, ask when you call and we'll tell you plainly.

Questions People Ask Before Hiring Us
- Will the repair show once it's finished?
- We aim for a wall where you can't find the patch. Compound is feathered well beyond the damaged spot, sanded flat and given the same texture as the rest of the surface. Paint touch-ups blend it in, though old or faded paint sometimes has to be carried to a corner so the color looks even.
- Should I repair the drywall or replace the whole section?
- Small holes, cracks and nail pops are usually patched. Board that is soft, crumbling, moldy from past leaks or sagging on a ceiling is better replaced. We'll show you what we see and explain the reasoning so you can decide.
- How messy is drywall work?
- Sanding throws off fine dust, so we prepare for it from the start. Floors and furniture get covered, doorways get sheeted off when needed and our sanders are hooked to a vacuum. At the end of each day we vacuum and wipe down the work area.
- How many days will the repair take?
- Compound has to dry completely between coats, so even a modest patch usually spans a few short visits. Bigger repairs and new drywall can run several days. Your estimate comes with an honest schedule so you can plan your week around it.
- Can you fix walls in older buildings with plaster?
- Yes. Many older homes in the area have plaster over lath or block, and it cracks and loosens with age and seasonal movement. We can repair plaster or replace damaged sections with drywall and finish them to sit flush with the surrounding wall.
- I had a leak. Can you repair the ceiling now?
- Only once the source has been fixed and the area is fully dry. Repairing over damp material leads to stains bleeding through and the new surface failing. We check for moisture and soft spots before starting any ceiling repair.
- How is the price decided?
- We see the damage in person first, then write up an estimate that separates each part of the job. The size and location of the damage, the texture and anything we find behind the surface set the cost. Nothing gets added without a conversation with you first.

Let's Get That Wall Looking Right Again
Tell us what's going on with your wall or ceiling and we'll set a time to see it. You'll know the plan and the price before any work begins.